I got an email from Matt asking about how to get the lift gate gas struts out and replaced. This might be a simple thing but not until you’ve done it once or twice.

So, this is usually a 5-10 minute job to replace both gas struts, and I do recommend replacing both at the same time. That gate coming down on the head will leave a bump!

Have a friend with you holding the gate in the up position. Work on the first strut by removing the (2) 10mm bolts at one end. Then with a small screw driver, on the ball end, you’ll see a “clip” retrainer holding on the ball. Facing you there will be a small divit for getting the screw driver in and pulling the clip out part way. This will allow the strut to be removed. Replacement is done in reverse, just pull the clip out part way put the strut in place and lock the clip down. Then it’s just putting the bolts back in for the opposite end. Now, switch spots with your friend and do the other side.

Matt – I’ll try to get pictures up tomorrow as a reference. And thank you! I try to get to all questions and as our parents told us, “there is no such thing as a dumb question”. If you don’t ask, you’ll never learn. So ask and I’ll try to get to them all as quickly as I can. And happy jeeping!

Posted by mechanic, filed under Information, Maintenance. Date: June 30, 2008, 9:58 pm | Comments Off on Lift Gate gas struts

Comments are closed.